1. System Control System: Ịnabata usoro nchịkwa CNC dị elu, nchekwa mmemme nke parampat akara dị iche iche na ngwọta usoro.
2. Onye na-eme ihe ziri ezi dị elu: nke servo moto na-ebugharị, na-edozi ya ruo ± 0.05mm.
3. Multi ọtọ ebu usoro: nwere ike ngwa ngwa dochie akara ebu nke dị iche iche nkọwa.
4. Ọrụ nchọpụta akpaaka: kwadoro ihe mmetụta maka nchọpụta dayameta ọkpọkọ, nchọpụta ọnọdụ, wdg.
5. Ngwa kọmputa mmadụ: arụ ọrụ ihuenyo mmetụ, ntọala paramita nwere nghọta na dabara adaba.
6. Nchekwa nchekwa: kwadoro ọtụtụ ngwaọrụ nchekwa nchekwa, dị ka nchekwa fotoelectric, bọtịnụ nkwụsị mberede, wdg.
| Ụdị & Ihe | Ntinye voltaji (HZ) | Ike ntinye (KVA) | Ugboro oscillation mmepụta (KHZ) | okirikiri ọrụ | Nrụgide mmiri jụrụ oyi (MPa) |
| GP-20 | 220V/50HZ | 2–20 | 30 ~ 110 | 100% | 0.05 ~ 0.15 |
| GP-30 | 380V/50HZ | 3-30 | 30 ~ 100 | 100% | 0.1 na 0.3 |
| GP-4O | 380V/50HZ | 4-40 | 30-90 | 100% | 0.1 na 0.3 |
| GP-50 | 380V/50HZ | 5-50 | 30-90 | 100% | 0.1 na 0.3 |
| GP-60 | 380V/50HZ | 5-60 | 30 ~ 60 | 100% | 0.15 ~ 0.3 |
| GP-80 | 380V/50HZ | 5–80 | 30 ~ 60 | 100% | 0.15 ~ 0.3 |
| GP-120 | 380V/50HZ | 5 ruo 120 | 30 ~ 60 | 100% | 0.2 ~ 0.35 |
| ZP-50 | 380V/50HZ | 5-50 | 3–19 | 100% | 0.15 ~ 0.3 |
| ZP-60 | 380V/50HZ | 5-60 | 3–19 | 100% | 0.15 ~ 0.3 |
| ZP-80 | 380V/50HZ | 5–80 | 3–19 | 100% | 0.2 ~ 0.35 |
| ZP-100 | 380V/50HZ | 5 ruo 100 | 3–19 | 100% | 0.2 ~ 0.35 |
| ZP-120 | 380V/50HZ | 5 ruo 120 | 3–19 | 100% | 0.25 ~ 0.4 |
| ZP-160 | 380V/50HZ | 5 ruo 160 | 3–19 | 100% | 0.25 ~ 0.4 |
| ZP-200 | 380V/50HZ | 5-200 | 3–19 | 100% | 0.25 ~ 0.4 |